Gyro iMax G192 Head Lock | Locked Gyro

Gyro head lock ( trava cauda ) de ótima qualidae e de baixo custo, ótimo para pequenos helicópteros

IMAX-G192
* Used for nitro engine and electric helicopter.
* Dual sensibility adjustment--head locked model and standard model.
* Be suitable for 4CH transmitter.
* With a built-in temperature equalizing electrocircuit.
* The gain value can be adjusted value can be adjusted through 6CH transmitter.

* Dimension: 22*22*12.8mm
* Input signal:1.5+0.5ms
* Input voltage:5VDC
* Weight:9g
* IMAX G192:1 Set

It can be used with 6 channels transmitter pluging gain cable on 5 channel and switch between head locked mode and standard mode.

It can be used with 4 channels transmitter in head locked mode only (do not use sense channel).

First on the tx flip the gyro switch down (HH mode), Next on the gyro is a small hole with what looks like a plastic screw in it. Gently turn that screw clockwise all the way then back off ccw just a bit. That little screw is you gain pot adjustment. When you lift off if the tail wags rappidly back and forth back it off a bit more until the wag stops.

As for the rotors wanting to tilt one way or the other; use the trim tabs to correct for this (tilt forward trim toward tail...)

Above all use the Radd method and do not cheat. It really works. I used it and the only time I crashed was when I got impatient and cheated. Helis are tough, just remember: small (very small) motions. Go slow and have fun, you will get it.

Good luck!

Add Favorites / Bookmark

importar no delicious